Storage Tanks and Calorifiers

Through its Ace series, Ajax Boiler specializes in the design and manufacture of A.S.M.E. code “hot water storage” tanks for all types of volume hot water requirements.  Popular as “calorifiers” and priced competitively, these units offer long-lasting use.

For over 75 years, Ace storage tanks have been fabricated by skilled craftsmen using the highest quality A.S.M.E. code certified materials.  All fabrication, welding, and testing are performed in strict accordance with A.S.M.E codes, and are continuously checked by A.S.M.E./National Board Inspections.  Two 10,000 gallon and two 770 gallon storage water heaters have been supplying the San Francisco’s Marriott for the last 15 years.

Standard tank openings provide:

  • Effective circulation of makeup and heater water.
  • Maximum hot water storage and “draw” capacity.

Broad selection of tank linings are available to extend tank life and insure clean, safe, potable water.

Tank linings include:

  • Ace Glass:  Porcelain Glass Enamel
  • Cement:  Heavy duty, resists cracking, good for temps to 180° F
  • Unlined:  Low cost storage for non-potable & non-sanitary water.
  • Pre-Krete:  Suitable for soft, acidic, or low pH water.
  • Stainless Steel:  Suitable for very soft, acidic, or high pH water.

Storage Tanks from 50 to 3,000 Gallons

ace_storage_tank

Features:

  • 24″ – 42″ diameter, all sizes from stock
  • ASME Section IV glass-lined (125 psig MAWP)
  • ASME Section VIII glass-lined (125 psig MAWP) cement-lined or Pre-Krete-lined (125 psig MAWP)
  • Glass-lined tanks are supplied with magnesium anodes and are suitable for potable water|
  • Cement lined tanks use ACE ATAHCO cement 1/4″ to 3/4″ thick for potable water up to 180°F max. temperature
  • Pre-Krete lined tanks use Pre-Krete G-8 lining 5/8″ thick for soft water, acidic water and steam condensate up to 350°F
  • Vertical or horizontal models available

Options:

  • ACE tanks may be packaged with valves, level controls, piping and or other ACE products.
  • Pipe or angle legs and tank rings (vertical) and loose or fixed saddles (horizontal)
  • Insulating packages including mirror finish steel jacket

asme_u3asme_hlw